gunzip -c patch-2.6.x_YYYYMMDD_accessrunner.gz | patch -p1

Code maturity level options 
[*] Prompt for development and/or incomplete code/drivers 
Loadable module support 
[*] Enable loadable module support 
[*] Set version information on all module symbols 
[*] Kernel module loader 
Networking options 
<*> Packet socket 
<*> Unix domain sockets 
[*] TCP/IP networking 
[*] Asynchronous Transfer Mode (ATM) 
USB support 
<*> Support for USB 
[*] Preliminary USB device filesystem 
UHCI 
OHCI 
Alcatel Speedtouch USB support (USB_SPEEDTOUCH) 
 
Networking options 
[*] Asynchronous Transfer Mode (ATM) 
[*] Classical IP over ATM 

Networking options 
[M] RFC1483/2684 Bridged protocols 
Network Device Support 
PPP (point-to-point protocol) support 
PPP Deflate compression 
PPP over Ethernet (EXPERIMENTAL) 

Network Device Support 
PPP (point-to-point protocol) support 
PPP Deflate compression 
PPP over ATM 
 Processor type and features 
[ ] Symmetric multi-processing support 
Cryptographic API (CRYPTO) 
CRC32c CRC algorithm (CRYPTO_CRC32C) 
Library routines 
CRC32c (Castagnoli, et al) Cyclic Redundancy-Check (LIBCRC32C) 

# 
# Config file for Conexant AccessRunner 
# 
# Driver mode 
DRIVER_MODE=1 # 1 = normal, 2 = debug, 3 = normal+max speed (without ask adsl status),4 = debug+max speed (without ask adsl status) 
# Protocol 
PROTOCOL_MODE=4 # 1 = RFC1483/2684 routed, 2 = PPP over ATM (pppoa), 3 = RFC1483/2684 bridged, 4 = PPP over Ethernet (pppoe) 
# Paths 
BINARY_PATH='/usr/sbin' 
ATM_PATH='' 
# ADSL 
# if OPEN_MODE is blank then cxload uses default mode acoording VID & PID 
# Values for OPEN_MODE are: 
# 0 = auto selection, G.Handshake 
# 1 = auto selection, T1.413 
# 2 = G.Handshake 
# 3 = ANSI T1.413 
# 4 = ITU-T G.992.1 (G.DMT) 
# 5 = ITU-T G.992.2 (G.LITE) 
OPEN_MODE=4 
# ATM 
VPI=0 
VCI=33 
# Specific for RFC1483/2684 routed/bridged 
# if IP_ADDRESS is blank in bridged mode then it uses DHCP to get IP 
IP_ADDRESS= 
NETMASK=255.255.255.255 
GATEWAY=